Accurate downhole diagnostics are fundamental to reservoir management, production optimization, and well integrity assurance. Production logging tools (PLT) provide the real-time and memory-mode measurements that operators rely on to characterize inflow profiles, identify crossflow behind casing, detect casing leaks, and evaluate completion effectiveness. As reservoirs mature and well architectures become more complex, the demand for compact, high-temperature, multi-sensor logging platforms continues to rise.
Industry Context
Modern production logging requires simultaneous acquisition of multiple physical parameters to construct a complete picture of downhole flow dynamics. Gamma ray (GR) and casing collar locator (CCL) sensors provide depth correlation and formation identification. Quartz pressure gauges deliver high-resolution pressure measurements essential for transient analysis and gradient surveys. Temperature sensors detect fluid entry points and quantify flow contributions from individual perforation intervals.
China Vigor has developed a comprehensive production logging platform that integrates these core measurements within a single modular tool string. The system architecture prioritizes mechanical and electrical interoperability, allowing operators to configure the sensor suite for each logging objective without custom engineering or extended setup time.
Platform Overview
The Vigor VPLT Production Logging Tools platform is available in five outer diameter sizes to accommodate a wide range of tubing and casing configurations. Each size variant supports both surface read-out and memory operating modes, with selectable communication protocols including Manchester code and AMI code. The memory mode is particularly valuable for operations where wireline conveyance is impractical, such as coiled tubing or slickline deployments in high-angle wells.
The modular tool string architecture allows operators to combine sensors based on specific diagnostic objectives. The available sensor modules include: telemetry cartridge, CCL for depth correlation, natural gamma ray for formation identification, temperature sensor for thermal profiling, strain-gauge pressure transducer for dynamic pressure measurement, quartz pressure gauge for high-resolution static pressure and transient analysis, tuning-fork fluid density sensor for phase identification, capacitance-based water holdup meter, and continuous spinner flowmeter for velocity profiling.
The Vigor VPLT Production Logging Tools system achieves full sensor interchangeability through standardized electrical and mechanical interfaces, enabling rapid reconfiguration between logging runs without recalibration.
Technical Specifications
|
Item Code |
O.D. |
Temp Rating |
Pressure Rating |
Communication |
|
VPLT-30 |
30 mm |
175 °C |
80 MPa |
Man-Code |
|
VPLT-32 |
32 mm |
175 °C |
80 / 100 MPa |
Man / AMI Code |
|
VPLT-35 |
35 mm |
175 °C |
100 MPa |
Man / AMI Code |
|
VPLT-38 |
38 mm |
175 °C |
100 MPa |
Man / AMI Code |
|
VPLT-43 |
43 mm |
175 °C |
100 MPa |
Man / AMI Code |
All five variants share a common temperature rating of 175 °C, making them suitable for high-temperature reservoirs where conventional electronics degrade. The smallest variant, VPLT-30 with a 30 mm outer diameter, is designed for slim-tubing access and can pass through restrictions as tight as 40 mm, enabling logging in wells with complex completion jewelry. The VPLT-43 variant at 43 mm O.D. accommodates larger-diameter sensors including the full quartz pressure gauge assembly with enhanced resolution.
Field Applications
Production profile logging remains the most common application, where the tool string traverses the producing interval to measure the contribution of each perforated zone. The combination of flowmeter, fluid density, and water holdup sensors allows operators to distinguish oil, gas, and water entries and quantify multiphase flow rates using established slip-model correlations.
Well integrity diagnostics represent a growing application area. By running a temperature sensor and high-resolution quartz pressure gauge across suspected leak zones, operators can detect small pressure anomalies and thermal disturbances indicative of tubing leaks, packer failures, or sustained casing pressure sources. The quartz pressure gauge achieves measurement resolution of 0.01 psi, sufficient to identify minor pressure communication pathways that would be invisible to lower-resolution strain gauges.
China Vigor also offers specialty sensor options including spectral gamma ray for clay typing and source rock evaluation, and tracer injection modules for flow regime identification in highly deviated wells. All tools are delivered with full calibration certificates traceable to national metrology standards and a 12-month operational warranty. For inquiries, contact info@vigorpetroleum.com





