The operating principle of a pumping unit can be simply described as the conversion of electrical energy into mechanical energy. The electric motor transfers its high-speed rotational motion to the output shaft of the gearbox. its output shaft drives the crank to rotate at a low speed. The crank, through the pitman and walking beam, causes the rear arm of the walking beam to oscillate up and down. The horsehead moves up and down, driving the sucker rods and plunger in a reciprocating motion, pumping oil to the surface. During the upstroke of the pumping unit, the traveling valve closes, creating a negative pressure zone in the area below.
(1) Function
The function of the pumping unit's crank-connecting rod mechanism is to convert the rotational motion of the electric motor into the reciprocating motion of the horsehead. its holes in the crank are used for stroke adjustment. The crank pin not only connects the crank and connecting rod but also bears the entire load of the pumping unit. The horsehead is mounted at the front end of the walking beam, with its arc radius centered on the center bearing housing. The component directly connected to the horsehead is the walking beam. The purpose of the horsehead is to ensure that the polished rod remains aligned with the wellhead center during pumping.
(2) Function Of Gearbox
The device responsible for speed change in a beam-pumping unit is the gearbox. The function of the gearbox is to support the crank counterweight and convert the high-speed motion of the electric motor into the low-speed rotational motion of the crank through a three-shaft, two-stage reduction. The output shaft of the pump unit's gearbox has two sets of keyways. Gearboxes are classified into helical gear reducers and herringbone gear reducers based on the gear type.
(3) Operating Principle of Electric Motor
An electric motor is a device that converts electrical energy into mechanical energy. It utilizes the rotating magnetic field produced by energized coils to act on the rotor's squirrel-cage closed aluminum frame, generating electromagnetic torque and causing the motor to rotate.
A motor that converts mechanical energy into electrical energy is called a generator, while one that converts electrical energy into mechanical energy is called an electric motor.
Electric motors are divided into AC motors and DC motors. AC motors are further classified into single-phase and three-phase, synchronous and asynchronous types.
In an asynchronous motor, the rotational speed of the stator's magnetic field is not synchronized with the rotor's rotational speed. Three-phase asynchronous motors are the most widely used due to their simple structure, reliable operation, easy maintenance, and relatively high efficiency.
Pump unit motors come in enclosed, open, and explosion-proof designs, with enclosed types being the most common.
Three-phase asynchronous motors are further categorized into squirrel-cage and wound-rotor types based on their rotor structure. Squirrel-cage three-phase asynchronous motors are the most widely used in industrial production, while wound-rotor three-phase asynchronous motors are generally used in applications requiring speed control and good starting performance, such as in cranes.
Vigor will provide you with a reliable solution, Please contact us at info@vigorpetroleum.com.





