+86-029-81161513

Well Drilling in Oil&Gas

May 20, 2025

Choice of rig, wellhead and BOP

The casing levels, the diameters and weight of the strings, the pressures and temperatures concerned, and the volumes of drilling mud to be used, are all aspects participating in determining the choice of rig type, blowout prevention systems (BOP, choke manifold, hydraulic circuit) and wellheads.

The choice of rig is closely bound up with the depth it is wished to reach and with the weight of the strings concerned.

According to the weights of the strings to be handled, rigs are used that have different characteristics, and what is of basic importance is the strength of the whole assembly, (travelling block, crown block, hook and derrick floor) from which the string hangs while being lowered into the well.

In offshore activity, the choice of the rig is determined, not only by the weight of the strings, but also by the depth of the water in the area of operations.

Drilling rigs installed on offshore vessels or platforms are built to reach the maximum possible depths and have all the material and equipment necessary for drilling on board.

The composition of the wellhead depends on the pressures that can be reached during the various working phases – both drilling and production – and on the diameters of the strings to be lowered into the well.

 

Control of drilling operations

The great complexity of the drilling process, its high costs, the need to ensure the full efficiency of the rig and the respecting of safety and of the environment call for a continuous optimizing of operations, which are achieved through the monitoring and processing of all available data, both geological and drilling.

To reach these objectives, every drilling rig, and in particular those that have to drill complex, deep and therefore costly wells, is endowed with more or less sophisticated mud logging units, which permit – through appropriate sensors and the activity of specialized personnel – the acquisition, processing and interpretation of a vast range of information of interest both to the geologist and to the drilling engineer.

Mud logging units are equipped with sensors, positioned in appropriate parts of the rig, permitting the automatic, continuous acquisition of the most significant parameters, and advanced information systems, based also on expert systems, as the means of managing operations in real time, with the consequent reduction of time and costs.

These sensors transmit their signals to a computerized system housed in the mud logging cabin, which provides for their representation also in graphic form, their storage in special local data banks, and the sending by means of radio links, dedicated telephone lines and communications via satellite, of selected data to operational centres.

 

Drilling costs

The drilling programme indicates also the budget that it is necessary to allocate to reach the targets, and which has to be adhered to during the construction of the well.

The costs of drilling a well can vary, depending on the particular type of well planned and the environment.

The budget contained in the drilling programme indicates the amount of the economic resources available in the estimate, which has to be adhered to as far as possible; but it is obvious that the real amount depends on the problems that crop up during drilling and on the capacity of the engineers to address them promptly without compromising the achieving of the objectives.

 

Well abandonment

If, when drilling has been completed, the well is productive hydrocarbons, a start is made on all those operations that will ensure its economically advantageous working, whereas if, on the contrary, it should prove to be barren or in any case not economically exploitable, it will be shut down.

Well shutdown entails the restoring of the initial conditions of the section of the well not lined and possibly also the lined part, if separation of the permeable levels of different pressure is not assured.

The purpose of these measures is to prevent the transfer of fluids from one level to the other.

The final shutdown of a well must satisfy not only the requirements set out in the engineering best practices fixed by the operator, but must also respond to all the requisites of law aimed at safeguarding the environment and the safety of the people living in the vicinity of abandoned wells.

As specialists in oil and gas downhole drilling and completion tools, Vigor comprises a team of seasoned professional engineers with decades of hands-on field experience. Their comprehensive expertise spans every phase of hydrocarbon extraction, ensuring operational excellence from planning to execution. Leveraging this robust technical foundation, we confidently guarantee industry-leading engineering solutions and cutting-edge technical support to every client who partners with Vigor.

If you seek premium-quality equipment and tailored services designed to optimize drilling efficiency, contact us today to explore how our innovations can elevate your operations. Vigor's dedicated professionals remain committed to fostering partnerships through proactive communication, collaborative problem-solving, and delivering measurable value. Reach out now to experience the Vigor difference firsthand.For more information, you can write to our mailbox info@vigorpetroleum.com & mail@vigorpetroleum.com

 

info-550-306

Send Inquiry