1. Tubing Spool And Tees
X mas trees tubing spool and tees connect to the master valve, swab valve, and wing valves. Common types include flanged and flange-by-studded connections. Trees using tubing spools are dual-wing trees, while those using tees are single-wing trees. Some platform trees integrate the tee with the swab valve and master valve or wellhead safety valve, forming an integral Christmas tree.
2. Gate Valves And Plug Valves
Gate valves have a closure element (gate) that moves perpendicular to the flow direction. Plug valves have a rotating closure element (plug), which can be cylindrical, conical, or spherical. Both types are used for wellhead control.
3. Chokes
Chokes are components used to control well flow rates, installed between the wing valve and the flowline. They can also control gas injection rates in gas-lift wells and water injection rates in injection wells. As throttling elements, chokes regulate the well's production pressure differential by changing the orifice diameter. Made from heat-treated high-carbon alloy steel, chokes come in diameters from 2-20mm, with 0.5mm increments.
There are two types: fixed and adjustable. Fixed chokes have replaceable inserts with fixed orifices for throttling. Adjustable chokes have an externally controlled variable-area orifice with a corresponding area indicator. The throttling mechanism consists of small holes distributed on a tubular part, with an outer sleeve moving axially to cover or uncover holes, changing the flow area.
4. Check Valves
Check valves, also known as non-return valves, allow fluid flow in only one direction. They're typically installed between the wing valve and choke on Christmas trees. While some production wells may not have check valves, they're common on water injection well trees. Types include inline, swing, lift, and butterfly check valves. They can be full-bore or reduced-bore, with common end connections being flanged or clamp hub.
5. Flanges
Flanges are raised-face end connections with bolt holes used for connecting pressurized equipment. API flanges conform to API specifications. Blind flanges have no central bore and are used to completely seal flange faces or outlet connections. They should have the same pressure rating and use the same sealing elements as the outlet flange they're sealing.
Flanges can be threaded or weld-neck. Threaded flanges have a sealing face on one side and internal threads on the other. Weld-neck flanges have a sealing face on one side and a welding bevel on the other.
6. Ring Joint Gaskets
Ring joint gaskets are sealing elements used in flange connections. Common API ring gaskets include R, RX, and BX types. R and RX types are interchangeable in 6B type flanges. BX types are only used with 6BX flanges. RX and BX types have pressure-energized sealing capabilities but are not interchangeable.
The 23° surfaces of R and RX gaskets should have a roughness no less than 63 RMS, while BX gaskets should be no less than 32 RMS. RX and BX gaskets have a pressure passage drilled through their entire height.
7. X-mas trees Caps
Tree caps are installed on top of the Christmas tree above the swab valve, providing quick vertical access to the tubing space. They must be removed for wireline operations, coiled tubing operations, production testing, sliding sleeve operations, or installing/removing backpressure valves.
8. X-mas trees Valves
①Master Valve: Controls the main passage for oil and gas flow into the Christmas tree.
②Production Valve: Controls oil and gas flow to the flowline.
③Swab Valve: Can be connected to a lubricator for wireline operations.
④Choke: Controls the production rate of naturally flowing wells.
⑤Small Cross: Connects components.
Vigor will provide you with a reliable solution, Please contact us at info@vigorpetroleum.com.





