Contact Us
- 23 F, Building B, Zhong Tou International Building, No.10 Jin Ye I Road, High-Tech Zone, Xi'an, Shaanxi, China 710077
- info@vigorpetroleum.com
- +86-029-81161513
-
15/Oct
2026
Non-Rotating Casing Brusher Hydraulics and Debris Transport
Cleaning a casing wall is a hydraulics problem as much as a mechanical one. A brush that scrubs well but blocks circulation leaves the debris it has just removed sitting on the low
-
15/Oct
2026
Downhole Sealing Solutions for Extreme Well Conditions
Most seal failures are not material failures. They are geometry failures: an O-ring specified for a duty that needs a spring-energized seal, or a static design used where the seal
-
15/Oct
2026
Coiled Tubing Unit Force and Speed Matching
A coiled tubing job is planned against two numbers that pull in opposite directions: how much force the injector can deliver at depth, and how slowly it can move while still holdin
-
16/Oct
2026
Skid-Mounted Wireline Unit Speed Control and Safety
Intervention programmes are bought against a depth rating and a deck footprint, but they are won or lost on speed control. A unit that can only trip fast cannot hold a production l
-
15/Oct
2026
Tension Sub Diagnostics for Stuck Wireline Strings
When a wireline string stops moving, the operator has one question to answer before anything else: is the cable stuck, or is the tool stuck? The two conditions demand opposite resp
-
15/Oct
2026
Electro-Hydraulic Setting Tool Force Independence at Depth
Setting a bridge plug at depth is a calculation rather than a fixed number. Hydrostatic head, mud density and the pressure trapped above a working piston all change what a hydrauli
-
15/Oct
2026
Wireline Gyro While Drilling Cuts Survey Rig Time
Top-hole sections on crowded pads and platforms are drilled under a survey constraint: direction has to be known before the next connection, and a separate wireline gyro run costs
-
16/Oct
2026
Electric Setting Tool Force Matching for Bridge Plugs
Every plug, packer or cement retainer has a force window: too little axial load leaves slips unset and the element unenergised, too much shears the release stud or damages the casi
-
16/Oct
2026
Conventional Production Logging Tools: String Sizing Decisions
Running a production profile through tubing means the instrument string must first pass every nipple, safety valve and restriction above the reservoir. Once it is below the deepest
-
15/Oct
2026
Ultra-HTHP Production Logging Tool Accuracy And Depth Control
A production profile is only as good as the error budget behind it. In wells pushing past 200 °C and 140 MPa, every channel in an ultra-HTHP production logging tool runs near t
-
15/Oct
2026
Well Test Derrick Truck Lifting Envelope And Stability
Lifting at a wellhead is a stability problem before it is a capacity problem. A well test derrick truck must set a hook load over a live well, hold it while a string or a tool is h
-
15/Oct
2026
Wireless Gyro While Drilling Hydraulic Envelope
Mud is the only data channel a wireless gyro while drilling tool has, so its survey stream is only as dependable as the circulation programme that carries it. Where a cabled gyro s