+86-029-81161513

Drill Pipe Processing Methods

Aug 13, 2024

1. Drill pipe grinding
Grinding of drill pipe is a commonly used processing method. A grinder or drill grinder can perform CNC grinding with high processing accuracy. Drill pipe grinding is suitable for products with higher processing requirements, such as parts in the aerospace field. However, this method requires a lot of time and has low productivity.

2. Cold heading

Cold heading refers to processing the drill pipe material at normal temperature. This method does not generate heat, so the strength and hardness of the drill pipe can be maintained. Cold heading is suitable for processing hard drill pipes with smaller diameters. It has faster processing speed and high productivity. However, cold heading processing generally requires the raw material to be stretched first, and surface treatment is required after processing.

3. Quenching
Quenching is a common method in drill pipe processing. By heating the steel to a certain temperature and then cooling it rapidly, the structure of the steel is changed, thereby enhancing its hardness and strength, and is suitable for producing a large number of high-quality drill pipes. However, the quenching process requires a lot of time and energy.

4. Carburizing
Carburizing is performed by carbonizing the surface of the drill pipe before quenching to improve its wear resistance and hardness. This method is suitable for mass production of high-strength, high-durability drill pipes. However, carburizing processing requires continuous time and temperature control, which is difficult.

5. High temperature heat treatment
Heat treatment is a very important step in the processing of drill pipe joints. Its purpose is to enhance the hardness and wear resistance of the joints. The selection of heating temperature should comply with the established technical standards, and the appropriate heating time and holding time should be selected according to the specific situation.

6. Turning processing
Turning is one of the most common methods in the machining process of drill pipe joints. Before turning, it is necessary to offset the centerline of the workpiece to a plane, and then correct the bending of the turning tool, relying on the angle to ensure the integrity of the cutting surface.

7. Oil treatment
Drill pipe joints need to be oiled during the production process to ensure the surface smoothness and rust-proof performance of the joints. The oiling treatment can be done twice with pigments and thin oil. Pay attention to cleaning the joint surface before painting.

8. Other processing methods

In addition to the above-mentioned common processing methods, there are also other processing methods, such as cold working, grinding, etc. The choice of a specific machining method needs to be evaluated based on manufacturing standards and workpiece characteristics.

 

As an enterprise with many years of experience in the oil and gas industry, Vigor's professional technical team has accumulated a large number of first-hand data from the laboratory, oil and gas field and customer feedback, based on which Vigor's engineer team can optimize and upgrade the program according to your needs to meet the complex and changeable site environment, so as to help you control costs. If you are interested in Vigor's downhole drilling and completion tools, please do not hesitate to get in touch with us to get the most professional technical support and the best quality products.

For more information, you can write to our mailbox info@vigorpetroleum.com & mail@vigorpetroleum.com

 

info-614-650

Send Inquiry