In the intricate and pivotal realm of drilling engineering, drill pipe undoubtedly assumes paramount importance. It serves as an intrepid warrior delving deep into the subterranean depths, enduring immense pressure and friction while paving the path towards procuring invaluable resources. How does VIGOR ensure that the drill pipe attains the utmost standard of quality to guarantee both safety and efficiency in drilling operations?
1.Vigor Drill Pipe Material Excellence
drill pipe
The foundation of high-quality drill pipe lies in its material composition. VIGOR drill pipe is meticulously manufactured to meet the rigorous API 5DP standards (DS-1 and NS-1 specifications are also available upon request). Drill pipes adhering to these stringent criteria exhibit exceptional tensile strength, enabling them to withstand the colossal forces exerted by the ground during drilling operations. As the drill pipe delves thousands of meters into the earth, it confronts relentless attempts from rock formations to dislodge it; however, thanks to its robust alloy steel construction, this formidable destructive force can be effectively resisted.
Heavy Weight Drill Pipe
In oil drilling, drill pipes are subjected to the torque generated by the rotating drill bit as well as the pulling force of lifting and lowering drilling tools, and high quality alloy steel ensures that the pipes will not be easily deformed or fractured under these complex conditions.
The Heavy Weight Drill Pipe (HWDP) from Vigor adopts APl SPEC 7-1 and NS-1 standards using the best materials of AlSl4145H and Non-magnetic materials.Heavy Weight Drill Pipe (HWDP) adopts Slick and Spiral types to ensure the product's superior performance in actual use. In addition, The Heavy Weight Drill Pipe(HWDP)also supports customized processing of hard banding and internal coating.
Therefore the toughness of the material is also a key factor.
The toughness of the drill pipe allows it to absorb the energy of an impact, such as the sudden impact of a hard rock layer, without brittle fracture, and the superiority of Vigor's drill pipe materials ensures the continuity of the drilling operation.
2.Precise Dimensions and Tolerances for VIGOR Drill Pipes
The dimensional accuracy of the drill pipe is an integral part of the quality standard. Precise outer diameter dimensions can ensure that a suitable clearance is maintained between the drill pipe and the well wall, which will neither cause excessive friction due to too small a clearance, nor affect the stability of drilling due to too large a clearance. For the inner diameter, it should be perfectly matched with other drilling equipments such as drill collars and drill bits to ensure that the drilling medium such as mud can circulate smoothly and realize the cooling and chip removal function of the drill bit.
|
Size |
Nominal Weight |
Drill Pipe Body |
Tool Joint |
|||||||||
|
Wall Thickness |
Upset Type |
Grade |
Thread Type |
O.D. of Pin & Box |
I.D. of Pin |
|||||||
|
mm |
In. |
Kg/m |
lb/ft |
mm |
In. |
mm |
In. |
mm |
In. |
|||
|
60.3 |
2-3/8 |
9.9 |
6.65 |
7.11 |
0.280 |
EU |
E75 |
NC26(2-3/8IF) |
85.7 |
3-3/8 |
44.45 |
1-3/4 |
|
X95 |
||||||||||||
|
G105 |
||||||||||||
|
70.3 |
2-7/8 |
15.49 |
10.4 |
9.19 |
0.362 |
EU |
E75 |
NC31(2-7/8IF) |
104.8 |
4-1/8 |
53.98 |
2-1/8 |
|
X95 |
50.8 |
2 |
||||||||||
|
G105 |
50.8 |
2 |
||||||||||
|
S135 |
111.1 |
4-3/8 |
41.28 |
1-5/8 |
||||||||
|
88.9 |
3-1/2 |
14.15 |
9.5 |
6.45 |
0.254 |
EU |
E75 |
NC38(3-1/2IF) |
120.7 |
4-3/4 |
68.26 |
2-11/16 |
|
19.81 |
13.3 |
9.35 |
0.368 |
EU |
E75 |
NC38(3-1/3IF) |
120.7 |
4-3/4 |
68.26 |
2-11/16 |
||
|
X95 |
127.0 |
5 |
65.09 |
2-9/16 |
||||||||
|
G105 |
61.91 |
2-7/16 |
||||||||||
|
S135 |
53.98 |
2-1/8 |
||||||||||
|
23.09 |
15.5 |
11.4 |
0.449 |
EU |
E75 |
NC38(3-1/3IF) |
127.0 |
5 |
65.09 |
2-9/16 |
||
|
X95 |
61.91 |
2-7/16 |
||||||||||
|
G105 |
53.98 |
2-1/8 |
||||||||||
|
S135 |
NC40(4FH) |
139.7 |
5-1/2 |
57.15 |
2-1/4 |
|||||||
|
101.6 |
4 |
20.85 |
14 |
8.38 |
0.33 |
IU |
E75 |
NC40(4FH) |
133.4 |
5-1/4 |
71.44 |
2-13/16 |
|
X95 |
68.26 |
2-11/16 |
||||||||||
|
G105 |
139.7 |
5-1/2 |
61.91 |
2-7/16 |
||||||||
|
S135 |
50.8 |
2 |
||||||||||
|
EU |
E75 |
NC46(4IF) |
152.4 |
6 |
82.55 |
3-1/4 |
||||||
|
X95 |
82.55 |
3-1/4 |
||||||||||
|
G105 |
82.555 |
3-1/4 |
||||||||||
|
S135 |
76.2 |
3 |
||||||||||
|
114.3 |
4-1/2 |
20.48 |
13.75 |
6.88 |
0.271 |
IU |
E75 |
NC46(4IF) |
152.4 |
6 |
85.73 |
3-3/8 |
|
EU |
E75 |
NC50(4-1/2IF) |
168.28 |
6-5/8 |
95.25 |
3-3/4 |
||||||
|
24.73 |
16.6 |
8.56 |
0.337 |
IEU |
E75 |
NC46(4IF) |
158.8 |
6-1/4 |
82.55 |
3-1/4 |
||
|
X95 |
76.2 |
3 |
||||||||||
|
G105 |
76.2 |
3 |
||||||||||
|
S135 |
69.85 |
2-3/4 |
||||||||||
|
EU |
E75 |
NC50(4-1/2IF) |
168.28 |
6-5/8 |
95.25 |
3-3/4 |
||||||
|
X95 |
95.25 |
3-3/4 |
||||||||||
|
G105 |
95.25 |
3-3/4 |
||||||||||
|
S135 |
88.9 |
3-1/2 |
||||||||||
|
29.80 |
20 |
10.92 |
0.430 |
EU |
E75 |
NC46(4IF) |
158.8 |
6-1/4 |
76.2 |
3 |
||
|
X95 |
69.9 |
2-3/4 |
||||||||||
|
G105 |
63.5 |
2-1/2 |
||||||||||
|
S135 |
57.2 |
2-1/4 |
||||||||||
|
IEU |
E75 |
NC50(4-1/2IF) |
168.28 |
6-5/8 |
92.1 |
3-5/8 |
||||||
|
X95 |
88.9 |
3-1/2 |
||||||||||
|
G105 |
88.9 |
3-1/2 |
||||||||||
|
S135 |
76.2 |
3 |
||||||||||
|
127.0 |
5 |
29.05 |
19.5 |
9.19 |
0.362 |
IEU |
E75 |
NC50(4-1/2IF) |
168.28 |
6-5/8 |
95.25 |
3-3/4 |
|
X95 |
88.9 |
3-1/2 |
||||||||||
|
G105 |
82.55 |
3-1/4 |
||||||||||
|
S135 |
69.85 |
2-3/4 |
||||||||||
|
E75 |
5-1/2FH |
177.8 |
7 |
95.25 |
3-3/4 |
|||||||
|
X95 |
177.8 |
7 |
95.25 |
3-3/4 |
||||||||
|
G105 |
177.8 |
7 |
95.25 |
3-3/4 |
||||||||
|
S135 |
184.15 |
7-1/4 |
88.9 |
3-1/2 |
||||||||
|
39.13 |
25.6 |
12.7 |
0.500 |
IEU |
E75 |
NC50(4-1/2IF) |
168.28 |
6-5/8 |
88.9 |
3-1/2 |
||
|
X95 |
168.28 |
6-5/8 |
76.2 |
3 |
||||||||
|
G105 |
168.28 |
6-5/8 |
69.85 |
2-3/4 |
||||||||
|
E75 |
5-1/2FH |
177.8 |
7 |
88.9 |
3-1/2 |
|||||||
|
X95 |
177.8 |
7 |
88.9 |
3-1/2 |
||||||||
|
G105 |
184.15 |
7-1/4 |
88.9 |
3-1/2 |
||||||||
|
S135 |
184.15 |
7-1/4 |
82.55 |
3-1/4 |
||||||||
|
139.7 |
5-1/2 |
32.62 |
21.9 |
9.17 |
0.361 |
IEU |
E75 |
5-1/2FH |
177.8 |
7 |
101.6 |
4 |
|
X95 |
177.8 |
7 |
95.25 |
3-3/4 |
||||||||
|
G105 |
184.15 |
7-1/4 |
88.9 |
3-1/2 |
||||||||
|
S135 |
190.5 |
7-1/2 |
76.2 |
3 |
||||||||
|
36.79 |
24.7 |
10.54 |
0.415 |
IEU |
E75 |
5-1/2FH |
177.8 |
7 |
101.6 |
4 |
||
|
X95 |
184.15 |
7-1/4 |
88.9 |
3-1/2 |
||||||||
|
G105 |
184.15 |
7-1/4 |
88.9 |
3-1/2 |
||||||||
|
S135 |
190.5 |
7-1/2 |
76.2 |
3 |
||||||||
|
168.3 |
6-5/8 |
37.54 |
25.2 |
8.38 |
0.33 |
IEU |
E75 |
6-5/8FH |
203.2 |
8 |
127 |
5 |
|
X95 |
203.2 |
8 |
127 |
5 |
||||||||
|
G105 |
209.55 |
8-1/4 |
120.65 |
4-3/4 |
||||||||
|
S135 |
215.9 |
8-1/2 |
107.95 |
4-1/4 |
||||||||
|
41.29 |
27.7 |
9.19 |
0.362 |
IEU |
E75 |
6-5/8FH |
203.2 |
8 |
127 |
5 |
||
|
X95 |
209.55 |
8-1/4 |
120.65 |
4-3/4 |
||||||||
|
G105 |
209.55 |
8-1/4 |
120.65 |
4-3/4 |
||||||||
|
S135 |
215.9 |
8-1/2 |
107.95 |
4-1/4 |
||||||||
- We provide all necessary specifications data for our products, please check the following table.
3.VIGOR has Rigorous Manufacturing Processes and Comprehensive Quality Inspections
The birth of high-quality drill rods cannot be separated from strict manufacturing processes. In the manufacturing process, forging is a key step in shaping the tough "body" of the drill rod. Through a reasonable forging process, the metal organization inside the drill rod can be made more compact and uniform, defects within the material can be eliminated, and the overall strength of the drill rod can be improved. The parameters of forging temperature, pressure, and time all need to be precisely controlled to ensure the stability of the drill rod quality.
In order to ensure that the drill rods meet high quality standards, comprehensive quality inspection is indispensable. VIGOR has built a professional quality inspection team that uses various professional inspection methods to strictly control product quality. Only drill rods that have passed rigorous inspection can enter the drilling site to provide reliable protection for drilling safety and efficiency.
4.Why Choose VIGOR Drill Pipe?
The quality standard of high-quality drill pipe is a systematic and rigorous system, from the selection of materials to the precise control of size, from the strict implementation of the manufacturing process to the comprehensive quality inspection, every link is closely linked, and together constitute the cornerstone of drilling safety and efficiency. Today, with the increasing development of drilling engineering, adhering to and improving these quality standards is of vital significance to promote the progress of the entire industry and ensure the smooth progress of resource extraction.
Founded in 2008, CHINA VIGOR is committed to researching, manufacturing and selling high-tech oil and gas drilling and completion, perforating tools and equipment, keeping pace with the development of the world's energy industry, focusing on advanced technology products with greater functionality and stability. After more than 10 years of development, the products have been used by many internationally renowned oil and oilfield service companies, and have been highly recognized and good feedback from customers. If you are interested in our products, please contact us: info@vigorpetroleum.com or 0086 029 81161513, we will provide you with quality service.
The company implements the ISO 500901 quality management system and API Petroleum Association standards, constantly learning and improving, providing the most reliable products and services, and taking "high-quality quality and innovative mode to continuously promote the development of the world's energy industry" as its mission, and "becoming a century-old enterprise in the energy industry and serving the world's 1000 leading enterprises in the energy industry" as its vision. With a strong technical team and the mastery of industry-leading resources, the company has made a number of breakthroughs in new materials and high-tech products, developed and manufactured new products used in fracturing, and obtained a number of national utility model patents and invention patents.
